Skip to content
HammerTek Corporation
  • Elbow Room
  • Back to HammerTek.com

HammerTek Elbow Room

SMART ELBOW® Deflection Elbow for Pneumatic Conveying Systemsress site

Smart Elbow® Deflection Elbow Make Wise Investment

February 9, 2016 by Miaja Cornelius

With a daily volume exceeding 80 million gallons of water treated, the Alexandria Sanitation Authority knows a little bit about the need for efficiency and just how catastrophic line breaches can be. To control pH, the facility uses more than 500,000 pounds of pelletized lime each month. Trucks deliver the material to 70-foot silos via a pair of four-inch lines.

Due to its abrasive nature, pelletized lime was wreaking havoc on the conveying system by literally wearing the traditional long-sweep elbows from the inside out. The never-ending cycle of repair-and-replace began within six months of elbow installation.

Upgrading to different traditional long-sweep elbows only marginally increased the functional lifespan from six to nine months. When the elbows would fail — and they would most assuredly fail — the powdery, dusty lime created a host of problems ranging from downtime to the very real risk of respiratory problems to those exposed.

When a postcard from Hammertek offering a free trial was passed on to Lead Mechanic Bob Devereux by Plant Process Manager Tom Tyler, he decided to put the Smart Elbow® deflection elbow to the test. Alexandria Sanitation Authority began replacing sweeps in the lime conveying system with 4″ Hammerloy™ Smart Elbow models. Over three months, five Smart Elbow products were deployed.

The Smart Elbow design rely on deflection, not impact, to change flow direction, thereby eliminating the impact-related problems associated with virtually every other conveying elbow design. At system start-up, a gently rotating ball of suspended material forms in the vortex chamber of the Smart Elbow deflection elbow. As the main flow of material passes this ball, it is deflected through the desired change of direction without impact, friction or wear to the elbow’s interior surfaces.

Close examination of the Smart Elbow deflection elbows after two years of service revealed zero wear, and the Authority has continued replacing its old-style sweeps with Smart Elbow products. According to Devereaux, switching to Smart Elbow deflection elbows has been a wise investment. When the Authority expanded operations, an additional 14 Smart Elbow models were specified as part of that project.

Click here to read the full case study, and see for yourself how much time — and money — Hammertek’s Smart Elbow deflection elbow could mean for your operation.

Post navigation

Previous Post:

Seeing is believing – Watch the Smart Elbow® deflection elbow in action

Next Post:

Abrasive Cement Dust No Match for the Smart Elbow® Deflection Elbow

Contact Us

HammerTek Corporation
2400 Emrick Boulevard
Bethlehem, PA 18020
Phone: 1-800-505-9665 or (610) 814-2273
Fax: (610) 814-0600
sales@hammertek.com
www.hammertek.com

About HammerTek

HammerTek is the inventor and manufacturer of the Smart Elbow® deflection elbow. Having recognized a need for extremely wear resistant and space efficient elbows, the designers created a revolutionary elbow that operates by deflection.

The Smart Elbow® design is a breakthrough in pneumatic and slurry conveying. Elbow wear, surging, product damage, plugging, and continual downtime are now nuisances of the past.

© 2025 HammerTek Elbow Room | WordPress Theme by Superbthemes